Kontron AM4220 - Manual (Page 36)

21 AM4220
www.kontron.com
Volatile Bit Rate (kbps) : 19.2
Non-Volatile Bit Rate (kbps) : 19.2
Payload Channel : 1 (0x01)
Payload Port : 623
Adjust serial baud-rate to 115.2 kBaud (required):
[root@router01 ipmitool-1.8.9]# src/ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin sol
set non-volatile-bit-rate 115.2
Connect to AM4220 serial interface via SOL:
[root@router01 ipmitool-1.8.9]# src/ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin sol
activate
[SOL Session operational. Use ~? for help]
~ #
Check board information (optional).:
~ # /mnt/bin/ipmitool fru
FRU Device Description : Builtin FRU Device (ID 0)
Board Mfg : Kontron
Board Product : AM4220
Board Serial : 1000749470
Board Part Number : T5516AB##
Board Extra : MAC=00:A0:A5:5D:23:9E/10
Product Manufacturer : Kontron
Product Name : AM4220
Product Part Number : T5516AB##
Product Version : 00
Product Serial : 1000749470
Product Asset Tag : 0000000000
~ #
The following example shows parts of a serial output of the boot process:
~ #
~ # reboot
The system is going down NOW !!
Jan 1 00:30:36 (none) daemon.info init: The system is going down NOW !!
Sending SIGTERM to all processes.
Jan 1 00:30:36 (none) daemon.info init: Sending SIGTERM to all processes.
Jan 1 00:30:36 (none) syslog.info System log daemon exiting.
Requesting system reboot.
128)
Restarting system.
U-Boot 1.1.1 (Development build) (Build time: Jun 5 2008 - 17:05:55)
Measured DDR clock 399.96 MHz
CUST_KONTRON_T5516 board revision major:0, minor:0, serial #:
OCTEON CN5750-SSP pass 1.1, Core clock: 600 MHz, DDR clock: 400 MHz (800 Mhz data rate)
PLD version: 4 Board Type: 0 Board Option: 2 Board Revision: 0
Performing MMC handshake ...done
Reset Type: 00 warm reset, Source: 08 Software Initiated
DRAM: 2048 MB
Flash: 128 MB
[...]