Kontron AM4220 - Manual (Page 35)

20 AM4220
www.kontron.com
Enable IOL interface on eth0:
~ # /mnt/bin/ipmitool lan set 1 access on
~ #
Now all configuration required for IOL connection from an external host via eth0 is done.
3.4.4.3 Configure SoL
The Linux host must now be configured to connect to eth0 (AMC port 0) of the AM4220. This is dependant on
the actual network topology.
Ipmitool executed on the external Linux host to check connectivity to AM4220 via the previously configured
IOL interface (optional). Following parameters have to be provided:
• -H
• -U
default: admin
• -P
default: admin
[root@router01 ipmitool-1.8.9]# ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin mc info
Device ID : 6
Device Revision : 0
Firmware Revision : 5.24
IPMI Version : 1.5
Manufacturer ID : 15000
Manufacturer Name : Kontron
Product ID : 5516 (0x158c)
Device Available : yes
Provides Device SDRs : yes
Additional Device Support :
Sensor Device
FRU Inventory Device
IPMB Event Receiver
IPMB Event Generator
Chassis Device
Aux Firmware Rev Info :
0x00
0x00
0x00
0x00
Show SoL settings (optional):
[root@router01 ipmitool-1.8.9]# src/ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin sol
info
Set in progress : set-complete
Enabled : true
Force Encryption : false
Force Authentication : false
Privilege Level : USER
Character Accumulate Level (ms) : 50
Character Send Threshold : 30
Retry Count : 0
Retry Interval (ms) : 100