Kontron AM4220 - Manual (Page 51)

36 AM4220
www.kontron.com
27 B1:Pres SFP-3
25h
(Entity Present) 6Fh
(Sensor specific)
The sensor shows
presents or absents
of SFP. No event is
generated.
Offset 0: Entity Present
Offset 1: Entity Absent
Offset 2: Entity Disabled
Sensor is only readable when
Payload Power is on.
(only available for AM4204)
28 B1:Pres SFP-4
25h
(Entity Present) 6Fh
(Sensor specific)
The sensor shows
presents or absents
of SFP. No event is
generated.
Offset 0: Entity Present
Offset 1: Entity Absent
Offset 2: Entity Disabled
Sensor is only readable when
Payload Power is on.
(only available for AM4204)
29 B1:Post Value
C6h
(OEM Kontron
Post Value)
6Fh
(Sensor specific)
When bootloader
postvalue is not 0
the sensor shows
the result value
code.
Offset 14:
Event Data 2:
Event Data 3: 00h undef
30 B1:Post Error
0Fh
(System Firmware
Progress)
6Fh
(Sensor specific)
Generates an event
when a POST error
occurred
Offset 0: event data 2: 00h
(unspecified): event trigger, A
Boot monitor POST failure
31 B1:Boot Error
1Eh
(Boot Error) 6Fh
(Sensor specific)
Generates an event
when an system
boot error is
detected
Offset 0:
Offset 3:
32 B1:Diag Status
C9h
(OEM Kontron ) 6Fh
(Sensor specific)
Generates an event
when Diagnostic is
finished.
Offset 0: Diagnostic Started
Offset 1: Diagnostic PASS
Offset 2: Diagnostic FAIL
33 B1:Fwupg Status
CAh
(OEM Kontron
External
Component
Firmware Upgrade
Status)
6Fh
(Sensor specific)
Generates event in
case of passed or
failed User SW
upgrade process.
Offset 0: Firmware upgrade in
progress (no event)
Offset 1: Firmware upgrade
succeeded
Offset 2: Firmware upgrade
failed
SDR
ID Name Sensor Type Code Reading Type Code Description Event Offset