Kontron KTHM76-mITX - Manual (Page 22)

KTQM77 – KTHM76 Users Guide
KTD-N0850-F Page 22
The principal test system and test equipment used TBD
1. Tektronix TDS5104B
2. Tektronix TCPA300
3. Tektronix TCP312
4. Fluke 289
5. Fluke 179
6. ATX rail switch
Note: Power consumption of PSU (power loss), Monitor and HDD are not included.
The following four configurations (a – d) have been tested TBD
a) Low Power Setup KTQM77/mITX ATX+12V PSU
b) Low Power Setup KTQM77/mITX +12V only PSU
Standard system configuration equipped with PCIex1 card, Internal graphics, 2x SATA disks, Intel i5
CPU, 1x SODIMM (1GB Modules), Monitor, Keyboard & Mouse. 1x 1-4GB USB Stick, 12V active
cooler (KT), PSU (Corsair 430W)
c) High Power Setup KTQM77/mITX ATX+12V PSU
d) High Power Setup KTQM77/mITX +12V only PSU
Standard system configuration equipped with PCIex1, PCIex16, miniPCIe WLAN, 4x SATA disks,
Intel i7 CPU, 2x SODIMM (1GB Modules), Monitor, Keyboard & Mouse, 4x 1-4GB USB Sticks, 12V
active cooler (KT), PSU (Corsair 430W).
ATX supplies
KTQM77 PSU
Gnd
Current
Probe
Tektronix TDS5104B
System Specification