Kontron KTHM76-mITX - Manual (Page 121)

KTQM77 – KTHM76 Users Guide
KTD-N0850-F Page 121
10.3.2.3 NB PCIe Configuration
Note: PCIe PEG Bifurcation is only supported on KTQM77/mITX having PCB ID 01 or above.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Chipset
NB PCIe Configuration
PEG0
PEG0 – Gen X
PEG0 ASPM
PCIe PEG Bifurcation
Enable PEG
Detect Non-Compliance Device
De-emphasis Control
PEG Sampler Calibrate
Swing Control
Gen3 Equalization
Gen3 Eq Phase 2
Not Present
[Auto]
[Disabled]
[1 x16]
[Auto]
[Disabled]
[-3.5 dB]
[Auto]
[Full]
[Enabled]
[Auto]
Configure PEG0 B0:D1:F0
Gen1-Gen3
► PEG Gen3 Root Port Preset Value for each Lane
► PEG Gen3 Endpoint Preset Value each Lane
►
PEG Gen3 Endpoint Hint Value each Lane
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Gen3 Eq Preset Search
PEG Link Disabled
Fast PEG Init
RxCEM Loop back
PCIe Gen3 RxCTLEp Setting
[Disabled]
[Disabled]
[Enabled]
[Disabled]
12
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc
BIOS - Chipset