Gastroback 41408 Design Mincer Pro M - Manual (Page 6)

30
the edge of the table or counter. The power cord may not touch hot surfaces. Ensure that no
one will pull the appliance by the power cord. Take care not to entangle in the power cord.
Always grasp the plug to disconnect the power cord. Do not touch the power plug with wet
hands when the appliance is connected to the power supply.
• Do not place or immerse the motor housing or the power cord in water or any other liquid.
Do not spill or drip any liquids on the power cord or exterior of the motor housing. When
liquids are spilled on the motor housing or power cord, immediately unplug and switch OFF
(ON/OFF button and power switch) the appliance.
Moving Parts – Risks of Injuries
The mincer is suited for finely chopping food. Thus, moving parts of the appliance can cause
severe injuries, when used contrary to these instructions.
• Do not insert your hands, hair, clothes, brushes, or other foreign objects (e.g. bones,
stalks of vegetables, cooking utensils) in the feed tube of the appliance or in the outlet of the
cutter housing, when the appliance is connected to the power supply. Before connecting the
appliance to the power supply, always ensure that there are no foreign objects in the feed
tube or cutter housing, and the appliance is assembled completely and correctly. Only use
the provided pusher to push down the ingredients. Do not push with violence, to avoid that
the mincer gets blocked.
• The edges of the cutter blade are very sharp. Ensure not to get injured when handling the
cutter blade.
• Do not hold your face over the feed tube, while the motor is agitating, because splinters
could escape from the feed tube, if you failed to see small pieces of bones or other hard
parts (e.g. stalks, hard seeds, stones) while preparing the foods. DO NOT push the foods
with your hands down in the feed tube, or poke in the feed tube!
Technical Specifications
Model: Art. No. 41408 Design Mincer Pro M
Power supply: 220-240 V AC, 50/60 Hz
Power consumption: 850 W (max locked motor power 2000 W)
Length of power cord: ca. 1.5 m
Weight: 5.35 kg
Dimensions: (width x depth x height) ca. 16.5 cm x 36.0 cm x 37.0 cm
Certification: