Gastroback 41408 Design Mincer Pro M - Manual (Page 10)

• Mincing and mixing
Use the cutter blade and one of the grinding discs.
Place the cutter blade on the worm shaft, the edges of the cutter blade facing upwards, and
turn the cutter blade gently until it settles on the shaft. It may not protrude the brim of the
cutter housing.
Select a suitable grinding disc (see: Tools), and place the grinding disc onto the worm shaft.
Ensure that the notch of the grinding disc fits onto the protrusion of the cutter housing.
• Making sausage
Use the separator disc and the sausage horn.
Place the separator disc over the worm shaft. The separator disc settles into the cutter
housing only in one way. Thus, ensure that the notch at one side of the brim of the separator
disc fits onto the protrusion of the cutter housing.
34
A
B
C
D
A B