Gastroback 41408 Design Mincer Pro M User Manual

Page 5

process bones, nuts, frozen foods or any other hard items.
• Do not place the appliance or any part of it on or near hot surfaces (e.g. burner, heater or

oven). Do not use any parts or tools of the appliance with any other device.

• Do not grasp in the gear hole of the motor housing, with the appliance connected to the

power supply. If you have forgotten to switch OFF the appliance, before dis-

connecting from the power supply, wait at least 10 seconds, before inserting

the plug into the power socket again.
• Do not leave the appliance unattended during operation. Always switch OFF (ON/OFF

button and power switch) at first, then unplug the appliance, and wait until the motor comes

to a standstill, before moving, or cleaning, or assembling or disassembling any parts, or

when the appliance is not in use. Always grasp the motor housing at both sides near the bot-

tom for moving or lifting. Do not hold the appliance at the tray or cutter housing, for moving

the appliance.
• Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any corro-

sive chemicals (e.g. bleach) for cleaning. Do not immerse the motor housing or power cord

in water or any other liquid. Do not spill or drip any liquids on the motor housing, or on the

power cord to avoid risk of fire and electric shock. Do not pour any liquids in the feed tube

with the cutter housing connected to the motor housing! When liquids are spilled in the motor

housing, immediately unplug the appliance, switch OFF the appliance completely (ON/OFF

button and power switch), and wait for the appliance to cool down. Thereafter, clean and

dry the appliance thoroughly. (See: Care and Cleaning)

• Do not place the appliance or any of its parts or tools in an automatic

dishwasher.

• Do not leave any food dry on the appliance. Always clean the appliance after each use to

prevent a build up of baked-on foods (see: Care and Cleaning). Always keep the appliance

and the tools clean.

Important Safeguards for Electrical Appliances

The appliance is driven electrically. Place the appliance near a suitable wall power socket

to connect the appliance directly to a protected mains power supply with protective conduc-

tor (earth/ground) connected properly. Ensure that the voltage rating of your mains power

supply corresponds to the voltage requirements of the appliance (230 V, 50 Hz, AC, rated

for at least 8 A).

The installation of a residual current operated circuit breaker (r.c.c.b.) with a maximum rated

residual operating current of 30 mA in the supplying electrical circuit is strongly recommen-

ded. If in doubt, contact your electrician for further information.
In various foreign countries, the specifications for power supplies are subject to incompatible

norms. Therefore it is possible that power supplies in foreign countries do not meat the requi-

rements for safe operation of the appliance. Thus, before operating the appliance abroad,

ensure that safe operation is possible.

• Do not to use any extension cords or multi socket outlets.

• Always handle the power cord with care. Always completely unwind the power cord

before use. Do not place the appliance on the power cord. The power cord may never be

knotted, twisted, pulled, strained or squeezed. Do not let the plug or power cord hang over