FBT QUBE SP27 - Manual (Page 27)

AES Diagnostics and Status Information
Also under the AES/EBU Sub Menu is the AES Status Information option, which can be used to check the
incoming sample rate(s) and confirm that the data is being received correctly.
Pressing will first show
AES Device Status
V1: E V2: E
This display shows the correct operation of the AES transmitters V1, V2. The letter after each is the silicon
version (and is of no importance to the user).
Pressing again will show
AES Device Status
V : 96k0
V : 96k0
This display shows the status of the two AES receivers, input A on the left, and Input B on the right. The
sample rate the unit has been able to lock to is shown, or UNLOCKED will be displayed in its place. The unit
will lock to sample rates from 32kHz up to and including 192kHz.
The unit's own processing sample rate is 96kHz, and AES output data is always at 96kHz. Internal sample
rate converters will translate all incoming rates to 96kHz – one converter for each AES input. This allows the
two input streams to be at different rates if necessary.
ENTER
ENTER
25