FBT QUBE SP27 - Manual (Page 22)

Menus in Detail
GLOBAL MEM.
Recall a Memory Recall, Input and Crossover Memories or combinations of.
Store a Memory Store, Input and Crossover Memories or combinations of.
Erase a Memory Erase, Input and Crossover Memories or combinations of.
INPUT SECTION
Input Ganging Gang (link) inputs together so their parameters track.
Input Reset Start wizard to reset sections of input parameters
CROSSOVER
Design a Crossover Set up a new crossover from scratch. This selection starts a wizard to guide through the
process. Also select this to alter the set-up of the current crossover.
Crossover Ganging Gang (link) outputs together so their parameters track.
INTERFACE
External Interface Starts a wizard to configure the baud rate, ID
GPI Interface Configure the GPI inputs used for closed contact memory recall (hardware option).
SYSTEM
System Status Displays a series of information screens including software version, temperature,
hardware and firmware versions, date and time. Press NEXT to jump through info.
LCD Contrast Adjusttheviewing angle of the screen.
LED Brightness Adjustthebrightness of all the meters and button LEDs.
Temperature Alarm Setthethreshold for the unit to flash a warning temperature message on the screen.
Wake-up Time Adjustthetimebefore the audio fades in on start-up – can also be set to keep mutes on
when powered up.
Output Meters Opt’n Select the monitoring point for the meters – either pre or post mute (so meters can be
set to work even when outputs muted)
Filter Q/Bandwidth Select the readout units for the ‘Q’ setting of parametric filters – ‘Q’ is1/Bandwidth (in
octaves) – small‘Q’valuesmeanwideresponsevariations.
Delay Time/Dist’nce Select the readout units for all delay values – either time, or distance in feet or metres.
Clip LED Hold Time Select the time that the input CLIP LEDs stay illuminated for after an overload has
passed.
Set Date & Time Adjustthereal time clock settings.
SECURITY
Unit Locking Protect the unit against unauthorised access with a password - please see page 33 for
more details.
AES/EBU
AES Status Info. Information screen showing details of the incoming AES streams (sample rate/lock).
20