FBT QUBE SP27 - Manual (Page 24)

As only memory 8 and memory 10 have all 3 types
stored, these will be the only numbers available
during a recall.
However, consider the example where the type of
recall is set to Input & Crossover. In this instance,
not only will the memory locations that have just
Input and Crossover types stored be available, but
the locations 8 & 10 will also be shown in the list.
There will be three memories to choose from in this
case, as location 6 is an Input & Crossover memory,
whilst 8 and 10 will appear as they contain Input and
Crossover information as well.
Selection of Crossover memories only will
additionally include locations 1 and 6 in the list of
memories available for recall, as shown below.
In this way it is possible to recall part of a memory,
as long as it contains the memory type required.
The 4 Series have 256 memory locations, but
these are dynamic in nature – obviously a
memory containing Input, Graphic and Crossover
settings takes up more space than one containing
just Input settings. Storage of 56 memories
containing Input.
22