FBT QUBE SP27 - Manual (Page 15)

Editing Audio Parameters - Input Channels
Gain
Gain Input A I n A
Input Gain = +6.0dB
Delay Input A I n A
Base Delay = 0.00mS
x 1mS
343mm
x 10uS
4mm
PEQ:1<> Input A I n A
1k00Hz Q=3.0 0.0dB
Frequency “Q” Gain
Input Gain
The range of the control over the input gain is –40dB to +6dB in 0.1dB steps.
Base Delay
The maximum available delay between any input and output is 650.00mS. For example, if the input delay on
channel A is set to 500mS, the maximum available output delay for any output fed from input A will be 150mS.
The readout units can be changed between time in milliseconds, distance in feet or distance in metres. Please
see page for more details.
Input Parametric EQ
There are eight bands of parameter equalisation available on every input. The behaviour of each individual
band can be changed to a variety of different filter shapes, including high and low shelves, notch, and
bandpass. Changing the filter type is achieved by pressing ENTER during editing any particular band. For
more details about the various types of filter available, please see page .
13