ETS-Lindgren 2081 Turntable Series 1.2m/1.5m (Archived) - Manual (Page 7)

MODEL 2080 / 2081 TURNTABLE SERIES Options
© ETS-LINDGREN L.P. – JANUARY 2003 3
REV C – PN 399228
OPTIONS
2080
2081 Model 2090 Positioning Controller: This controller provides
control for two separate devices (towers and turntables) in any
combination, plus the control of four auxiliary devices via a fiber
optic interface. The unit includes a GPIB connection and is
compatible with most popular EMI measurement software.
2080
2081 Shield Room Feed-through: This option allows the customer to
take the fiber optic control cable from the control room to the
shield room while maintaining shielding attenuation. The unit is
made of brass for conductivity and provides attenuation of
greater that 100 dB at 10 GHz. A single 22.25 mm (.875 inch)
hole is required to mount this option.
2080
2081 Additional Fiber Optic Cable: Various lengths of fiber optic
cable are available by customer order. The standard length
provided is 10 m (32.8 ft).
2081 Hand Control Unit (HCU): This sturdy, hand-held controller
will allow the user to manually operate the table remotely and
independently from the Model 2090 Positioning Controller. This
controller attaches conveniently to the electrical enclosure
located on the base of the turntable. Functions include:
Clockwise (CW), Counterclockwise (CCW) and Hand/Main
Control selection.
2081 for
electrical
and signal
connections
Slip Ring: This option allows continuous rotation of the
turntable through the use of the latest technology in mercury
slip-rings. The slip ring option is typically supplied with Schuko
or NEMA connectors. Specify part #103441 for NEMA
connectors, and part #103351 for Schuko connectors. The
amperage rating for the standard electrical assembly is 20 amps.
Consult the factory for all custom requirements on slip-rings.
Archived 3/18/10