beautypg.com

ETS-Lindgren 2115 Multi-Axis Positioning Systems (MAPS) User Manual

Page 21

background image

Installation

|

21

5. The MAPS drive units are designed to move from the shipping container to the

chamber floor as a single unit. If you cannot move it as a single unit without causing

damage, separate the upper drive unit. See Upper Drive Unit Removal on page 22.

6. Place on the

chamber floor within

the drawn circle.

When installing the turntable on modular shielding, do not drill anchor holes

through the floor joint strips. Use the shim plates provided.

7. Insert the shim plates to level the turntable over the vault seams.

A

NCHOR

P

LATE

I

NSTALLATION

8. The anchor plates are held in place by 1/4–20 screws and set collars. Screw the

anchor plates to the floor using 14x1 square socket flat head screws.

Drill pilot holes for these screws, and make sure to vacuum shavings to provide good

contact with the floor. Continue mounting the remainder of the plates.