ETS-Lindgren SMART 1000 Mini-Reverb Cell - Manual (Page 9)

Maintenance | 9
2.0 Maintenance
Before performing any maintenance, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
If you have any questions concerning maintenance, contact ETS-Lindgren
Customer Service.
Optional Maintenance Program
ETS-Lindgren offers an optional maintenance program that consists of a
complete package of services for continued RF integrity in the shielded
enclosures. The services may be performed on a three-month or six-month cycle.
The program consists of the following:
• Inspection of doors and access panels. Extreme care will be taken
to repair, clean, and lubricate the RF seals (fingers and vinyl seals). If
necessary, they will be replaced.
• Inspection of hinges. Hinges will be checked for alignment and
adjusted as needed.
• Inspection of door and access panel latching mechanisms.
Latching mechanism of doors and access panels will be inspected.
Any defective or worn components which cannot be repaired will be
replaced. Adjustment will be performed as needed. Extra material used
to replace damaged parts due to abuse or failure to comply with
recommended maintenance procedures will be charged to the
customer.
• Inspection of tuners. Tuner operation will be checked, lubricated, and
adjusted as necessary.