ETS-Lindgren SMART 1000 Mini-Reverb Cell - Manual (Page 27)

Tuners | 27
C OMMAND S YNTAX
Use a program that allows direct communication with the COM ports to verify
satisfactory operation of the tuners; for example, ETS-Lindgren SMARTImm
Immunity Control Software.
Command Parameters Function Example
Sx 0/1/2/3/ ? Set tuner speed/Query S1
CR NA Continuous rotation
NCR NA Non-continuous rotation
ST NA Stop
CP nnn.n 000.0-999.9/ ? Current Position/Query CP180.0
CC NA Move CCW
CW NA Move CW
UL nnn.n 000.0 – 999.9 / ? Set CW Limit/Query UL360.0
LL nnn.n 000.0 – 999.9 / ? Set CCW Limit/Query LL000.0
DIR? NA Query Direction
SK nn.n * nn.n – 80 * Seek Position SK75
* Angle required divided by 4.5; for example, 300/4.5 = 75
Tuner Control – SMART 80 and SMART 200
The SMART 80, SMART 200, and other large chambers are operated using the
ETS-Lindgren Model 2090 Multi-Device Controller (or next generation
ETS-Lindgren controller, if applicable). The command set for the controller is
described in detail in the controller manual. Go to www.ets-lindgren.com to
download the controller manual.
Operation of all SMART chambers is described in detail in the SMARTImm
Immunity Control Software and SMARTEmi Emission Control Software manuals.
These programs are used to control the chamber and contain the necessary
drivers for all available tuner control options.