Elecraft KNB1 Manual - Manual (Page 2)

2
Parts Inventory
The table below lists all parts in the kit. If you have trouble identifying any of these items,
consult the K1 Owner's manual, which has photographs of similar parts.
Ref. Description Qty Part No.
C3, C12 Capacitor, disc, 10 pF, 5% 2 E530006
C1 Capacitor, disc, 180 pF, 5% ("181") 1 E530075
C9, C13 Capacitor, mono, .001 µF (“102”) 2 E530074
C4-7 Capacitor, mono, .01 µF (“103”) 4 E530019
C11 Capacitor, mono, 0.1 µF (“104”) 1 E530020
C2 Capacitor, ceramic trimmer, 8-50 pF 1 E540000
C10 Capacitor, electrolytic, 2.2 µF 1 E530023
C8 Not used -- --
D1, D2 Diode, 1N4148 2 E560002
D2 Alt. Diode, Green LED (alternate for D2; see text) 1 E570006
L1 Inductor, 25 µH, 22 T #26 on FT37-61 core (gray) 1 E680002
L2 Inductor, 75 µH, 20 T #26 on FT37-43 core (gray w/orange dot) 1 E680003
P1 Conn., 8-pin male, 0.1" spcg., gold, Samtec TSW-108-07-G-S 1 E620004
Q1-2, Q4, Q7 Transistor, NPN, 2N4124 4 E580006
Q3, Q8 Transistor, PNP, 2N3906 2 E580000
Q5-6 Transistor, MOSFET, 2N7000 2 E580002
R1 Resistor, 180 ohms, 1/4 W, 5% (brown-gray-brown) 1 E500014
R2 Resistor, 3.9 k, 1/4 W, 5% (orange-white-red) 1 E500009
RP1 Resistor network, 470 ohms, 5 resistors (isolated), 10 pins 1 E510015
RP2 Resistor network, 27 K, 4 resistors (isolated), 8 pins 1 E510019
U1 IC, Microcontroller, 12C509A 1 E610008
RF-J1 Conn., 8 pin female, 0.1" spcg., gold, Samtec SSW-108-01-G-S 1 E620005
HDWR Lock washer, #4, internal tooth (1 spare) 3 E700010
HDWR Machine screw, 4-40 x 3/16", pan-head phillips 1 E700015
HDWR Hex nut, 4-40 1 E700011
HDWR Standoff, 3/16" dia. x 7/16" long, hex M-F, 4-40 threaded 1 E700017
MISC Wire, #26 enamel 4 ft. E760002
MISC KNB1 PC board 1 E100106