Tools required, Parts supplied – Elecraft KXBC3 User Manual

Page 6

Tools Required

1. ESD Protection (see Preventing Electrostatic Discharge Damage, pg 1).

2. #1 size Phillips screwdriver. To avoid damaging screws and nuts, a power screwdriver is not

recommended.

3. Soft cloth or clean, soft static dissipating pad to lay cabinet panels on to avoid scratching.

Parts Supplied

Be sure you have the following components in your kit. If anything is missing, contact Elecraft customer
support (pg 13).

ILLUSTRATION DESCRIPTION

QTY.

ELECRAFT

PART NO.

KXBC3 Module

ESD SENSITIVE! Do not remove

from ESD-Safe Bag without taking
ESD precautions.

1 E850485

CP Board Shield

E100444

4-40 3/16" (4.8mm) Black Flat Head
Screw

E700173

2-56 5/32” (4.0mm) Black Pan Head
Screw

1 E700170

#4 Lock Washer, Split Ring

E700004

4-40 3/16” (4.8mm) Nylon Standoff

E700263