EFCO 406 (T) Series - Manual (Page 38)

Fig. # 42
If using antiwalk blocks,
refer to page 38.
C
NOTE:
A
B
B - GLASS INSTALLATION
SECTION V GLAZING
A) Position the glass unit in front of the opening to be glazed. Lift the unit
to just clear the sill stop area, and then shift the glass into the deep pocket.
C) Shift the glass into the shallow pocket until there is equal glass bite
B) Swing the opposite edge of the glass around to align with the glazing
on both edges of the glass.
STEP 2) GLASS INSTALLATION
pocket.
(CONT.)
406 STOREFRONT DPS 12/2002
PAGE 36