1" infill, Apply exterior weather seal – EFCO S5600 Structural Glazed User Manual

Page 24

EFCO CORPORATION 7/2012 PART NO. Y306

Page 24 of 28

Series 5600 Silicone Structural Glazed Installation Instructions

Section VIII: Exterior Weather Seal

Apply Exterior Weather Seal

A.)

Install backer rod between the two infill units (insulated and monolithic).

B.)

Apply exterior weather seal as recommended by the sealant manufacturer.

1" INFILL

Note: Seal up to temporary retainers. After the structural sealant

cures, remove the temporary retainers and seal remaining gaps.

Backer Rod

Weather seal