Dynojet Spring Applied Air Release (SAAR) Brake Assembly - Manual (Page 14)

Spring Applied Air Release (SAAR) Brake Assembly Installation
S P R I N G A P P L I E D A I R R E L E A S E ( S A A R ) B R A K E A S S E M B L Y I N S T A L L A T I O N
The Hydraulic Brake Assembly
10
6 Remove four lower bolts holding the slave cylinders and brake head assembly to
the brake frame rail.
7 Remove the four bolts holding the master cylinder bracket to the dyno,
supporting the hydraulic brake assembly during the final removal of the bolts.
Figure 9: Remove Bolts
BR017
remove bolts and washers
remove four
bolts
master cylinder bracket
slave cylinder
slave cylinder