Detex DTX-1300 - Manual (Page 4)

101160 Page 4
6. Programming the "DTX1300" series with Keypad and Cardreader:
COMMAND
validate range of cards
add one card to range of cards
cancel single card
reinstate all cancelled cards
enable keypad
disable keypad
enable card reader
disable card reader
enable CAC No., disable P.I.N.
disable CAC No., enable P.I.N.
set strike time
set door open time
set keypad time out
print valid range of cards
print invalid card list
set time
set date
8. Turn "POWER" switch "OFF".
9. Turn “PROGRAM” switch “ON”.
10. Turn "POWER" switch "ON" and observe LED flashes on/off.
11. Close cover and lock.
KEYPAD SEQUENCE
01 * start 4 digit No.(0001-9999) * end 4 digit No.(0001-9999) #
01 * start 4 digit * end 4 digit(include added card number) #
02 * 4 digit No.(0001-9999) #
02 * 0 #
03 * 1 #
03 * 0 #
04 * 1 #
04 * 0 #
05 * 2 to 4 digits(00-9999) #
05 * 0 #
08 * 3 digit No. 001-255 sec #
09 * 3 digit No. 001-255 sec #
10 * 3 digit No. 001-255 sec #
11 * #
12 * #
17 * hr(00-23) * min(00-59) * sec(00-59) #
18 * mo(01-12) * day(01-31) * yr(00-99) #
GLOSSARY OF TERMS:
STRIKE TIME - Controls time which strike relay remains energized.
DOOR OPEN TIME - Controls time which door may remain open before alarm relay will
operate.
KEYPAD TIME OUT - Controls time allowed to complete keypad operation for access.
P.I.N. - Personal Identification Number included in card information.