Detex EA-2500 User Manual

Detex Safety

INSTALLATION INSTRUCTIONS FOR THE EA-2500 EXIT ALARM (POLYMER CASE)

Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130 (830) 629-2900 / 1-800-729-3839 / FAX (830) 620-6711

E-Mail: [email protected] Internet: www.detex.com

WARRANTY

The Detex Security hardware product you have purchased is warranted to be free of defects in material and workmanship when properly

installed, used and maintained according to instructions. We will, for a period of one (1) year from the date of purchase, repair or replace

any part which, upon our examination, proves to be defective under normal use. This does not apply to batteries or to damage from battery

leakage. This warranty will be honored only upon presentation of proof that the product covered thereby was purchased directly from

an authorized Detex Distributor. WE SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL LOSS

OR DAMAGE ARISING OUT OF THE FAILURE OF THIS DEVICE.

DETEX INS2500 PAGE 1

FIG. 3.- MONITORING TWO DOORS WITH ONE ALARM

SEE PAGE 5 FOR WIRING

EQUIVALENT METRIC DIMENSIONS

ENGLISH

MILLIMETERS

ENGLISH

MILLIMETERS

1/8"

7/8"

1/4"

5/16"

1-1/4"

3/8"

1-9/16"

1/2"

1-3/4"

5/8"

3-3/4"

3/4"

8-3/4"

222

E:\PM4\TABLES\METRICS.TBL

FIG. 2 FLUSH MOUNT

IN-WALL WIRING

FIG. 1 SURFACE MOUNT

SURFACE WIRING

NOTE: The EA-2500 can be in-

stalled on either side of the door.

INS-2500/PM MAY 2, 2001