Detex Keyed Removable Mullions - Manual (Page 2)

REMOVE BACKING THEN ADHERE THE
FOAM TAPE (DETEX P/N 101758-1)
TO THE INSIDE BACK WALL OF THE
POST AS SHOWN.
TYPICAL
DOOR FRAME
SHIMS
(1/2 OR 5/8)
5/16-18 X 1-1/2” (p/n 101147) or
5/16-18 X 2” (p/n 101143
MACH FHP SCREWS (SUPPLIED IN
MULLION HARDWARE KIT)
5/16-18 X 5/8” (p/n 100224)
MACH FHP SCREWS (SUPPLIED IN
MULLION HARDWARE KIT)
INSTALLATION INSTRUCTIONS FOR MULLION SHIMS
(ILLUSTRATION A)
NOTE: The shims are to be used when the top fitting overhangs the stop.
1) Check stop height and match to shims supplied (1/2" or 5/8").
2) Install shims using the long screws (5/16-18 x 1-1/2" and 5/16-18 x 2" FHP)
supplied in the hardware kit. (See Illustration A above)
Longer screws required in certain applications.
PROBLEMS?
Contact Customer Service at
1-800-729-3839
INS-F90KR Page 2
(DWG 4206)