Switching handing from rhr to lhr, 02 outside lever trim – Detex 02DV Trim User Manual
Page 2
Place trim on a clean surface
with this view facing up.
Use 1/8” Allen Wrench to
remove screw.
Pull Back Blocking Plate.
Caution: do not lose the
brass shear pin located
inside assembly.
Turn Handle and plate 180 deg.
Replace plate, add permanent thread
locking adhesive and tighten Allen Screw.
Tools Required
02 Outside Lever Trim
Screw Driver
Safety Glasses
Power Drill
Center Punch
Tape Measure
Hammer
Pencil
Page 2
Switching Handing from RHR to LHR
This manual is related to the following products: