Troubleshooting – Salter Brecknell 7680 User Manual
Page 34

Model 7600 Family PWC User’s Manual
34
Perform the following steps in the order pre-
sented until the described problem is corrected. If
the problem cannot be corrected, contact an
authorized Weigh-Tronix service provider.
No Power (Display is Blank)
1.
Check that the primary side of the cord is
plugged into the AC outlet, and the second-
ary side is properly connected to the power
jack on the back of the scale.
2.
Replace the power supply.
3.
Replace the display board.
4.
Replace the I/O board.
5.
Replace the QDT load cell.
Missing or extra segments on display
1.
Replace the display board.
2.
Replace the QDT load cell.
Troubleshooting
This manual is related to the following products: