Salter Brecknell 7840 - Manual (Page 29)

Model 7800 Family Weight Classifiers User’s Manual 29
8. Press the ZERO key until desired capacity/
resolution is displayed.
9. Press the TEST key to select a new capacity/
resolution.
10. Close Swtich 1 to return to normal weighing
mode.
The TEST key located on the front panel lets you
perform some basic system diagnostics, as well
as review the current system settings without
having to access switches inside the scale.
If you press and release the TEST key, the
display will show the scales model number,
version-revision, and performs a display
test. To review the current system settings,
press and hold the TEST key until the
display shows, “- - - - - - - - “.
Review/Test Scale Settings