Salter Brecknell 7840 - Manual (Page 22)

Model 7800 Family Weight Classifiers User’s Manual 22
Table 3
OUTPUT PRINT FORMATS
Formatted Output Data String Selection Display
WWW.WW uu LFuuLF*
WWW.WW uu LFuu—
WWW.WW LF—LF
WWW.WW LF——
WWW.WW uu —uuLF
WWW.WW uu —uu—
WWW.WW ——LF
WWW.WW ———
*Default factory setting
Where: ...... Represents the line feed character (ØA hex)
W ........... Represents a weight digit character
uu .......... Represents the unit-of-measure characters (lb or kg)
..... Represents the carriage return character (ØD hex)
14. When finished configuring your scale, press
the ZERO key until DONE is displayed; then
press the TEST keys, or close Switch 1 to
return to the normal weighing mode.
11. Press the ZERO key...
PRTOUT is displayed. This stands for
printout.
12. Press the TEST key...
The current printout format is displayed.
13. Press the ZERO key to scroll through the
choices. When the choice you want is
displayed, press the TEST key...
Your choice is accepted and the display
shows PRTOUT.
The PRTOUT configu-
ration selection (in the
CONF menu) allows
you to select the
format of the data
string that is transmit-
ted during autoprint
(AUTO-1 or AUTO-2)
or the manual print
(PRINT) modes. This
does not apply to the
other protocol modes.