Salter Brecknell 7840 - Manual (Page 18)

Model 7800 Family Weight Classifiers User’s Manual 18
18. Press the ZERO key...
PROT is displayed. This stands for
protocol.
19. Press the TEST key...
The current serial protocol selection is
displayed.
20. Press the ZERO key...
BAUD is displayed. This stands for baud
rate.
21. Press the TEST key...
The current baud rate and parity selec-
tion is displayed.
22. Press the ZERO key...
CAP is displayed. This stands for capac-
ity.
23. Press the TEST key...
The current capacity/resolution selection
is displayed.
24. Press the ZERO key...
TYPE is displayed. This stands for
rounding type (classifier or scale).
25. Press the TEST key...
The current rounding type, SCALE for
standard rounding or CLASS for classi-
fier rounding, is displayed.
26. Press the ZERO key...
UNITS is displayed. This stands for unit-
of-measure.