Salter Brecknell 650 User Manual
Page 32
32
5.6 ITEM ID SUB-MENU
This function is used to list, print or erase all items stored in the scale.
1. From the main menu. Press the * key.
2. Press the ItemID soft key. Scale prompts “Input Password”. Enter 6666. The
Configuration sub-menu items are listed above the six soft keys.
5.6.1 IntItem
INITIAL ITEM ID’s (Initial)
This function is used to erase all stored item ID’s.
Use with extreme caution – this process cannot be undone!
1. Press the IntItem soft key. The scale asks you to confirm this action.
2. Press the Yes soft key to proceed or press the No soft key to abort the operation.
5.6.2 EnSave
1. If Enable is selected with the soft key, any time the print command is used, the scale
will prompt “Save Item ID?” if the item being counted is not already in the database.
5.6.3 DnLoad & UpLoad
1. Dnload is used to send a database from a PC to the 650. UpLoad sends the 650
database to a PC.
5.6.4
1. Prints the 650 database to a dot matrix printer.
5.6.5 LIST
1. Displays a list of items in the database. See 4.2.2.