Salter Brecknell 650 - Manual (Page 17)

17
Press the ITEM ID soft key, then press the KEYIN soft key and the scale
prompts “Enter Product ID”. Enter the Product ID and press ENT. The scale
loads the record information.
NOTE 3: If using the remote QWERTY keyboard, use the ENTER key from the
remote keyboard for Product ID and Name. Use the ENT keyboard from the scale
for the other fields.
4. Once the desired item is highlighted, press the Edit soft key. The scale displays a list
of stored item entries. The scale displays a summary of the item’s information on the
screen shown in Figure 4-2.
Edit APW Tare Done
Item 0001 INFO
Product ID:
Name: EYEBOLT
Unit: LB
123456789
0.085200000 APW:
Tare Wt (L): Tare Wt (R): 0.1230 0.9980
16 ACC:
FIGURE 4-2: Edit Item ID Screen
5. Use the Up and Down soft keys to highlight alphanumeric fields or the APW or TARE soft
key to select those numeric fields you wish to edit.
6. Once the desired field is highlighted, press the Edit soft key.
To edit a numeric field, simply enter in the new data using the numeric keys
followed by the ENT key, or you can use the optional QWERTY keyboard.
Numeric fields include APW, Tare Wt (Local) and Tare Wt (Remote). If you
make an entry mistake, press the CLR key to restore the original data.
To edit the Product ID and the Name field, use the numeric keys to enter
alphanumeric characters, or you can again use the optional QWERTY keyboard.
On the 650, two numeric keystrokes are required to enter one alphanumeric
character. Use Table 4-1 to determine how to enter each alpha character.
When you are done entering the Name field, press the ENT key. If you make an
entry mistake, press the CLR key to restore the original data.
“ 0 ” = 0 + 0 “ 1 ” = 0 + 1 “ 2 ” = 0 + 2 “ 3 ” = 0 + 3 “ 4 ” = 0 + 4 “ 5 ” = 0 + 5 “ 6 ” = 0 + 6 “ Z ” = 9 + 4
“ 7 ” = 0 + 7 “ 8 ” = 0 + 8 “ 9 ” = 0 + 9 “ A ” = 2 + 1 “ B ” = 2 + 2 “ C ” = 2 + 3 “ D ” = 3 + 1 “ ” = 1 + 1
“ E ” = 3 + 2 “ F ” = 3 + 3 “ G ” = 4 + 1 “ H ” = 4 + 2 “ I ” = 4 + 3 “ J ” = 5 + 1 “ K ” = 5 + 2
“ L ” = 5 + 3 “ M ” = 6 + 1 “ N ” = 6 + 2 “ O ” = 6 + 3 “ P ” = 7 + 1 “ Q ” = 7 + 2 “ R ” = 7 + 3
“ S ” = 7 + 4 “ T ” = 8 + 1 “ U ” = 8 + 2 “ V ” = 8 + 3 “ W ” = 9 + 1 “ X ” = 9 + 2 “ Y ” = 9 + 3
TABLE 4-1: Entering Alphanumeric Characters
7. Once all fields are edited, press the Done soft key. The scale confirms that you wish to
save the changes.
8. Press the Yes soft key to save the changes. Otherwise, press the No soft key.