Function keys and displayed annunciators – Salter Brecknell C3255 User Manual
Page 5

1000 Armstrong Drive. Fairmont, Minnesota 56031 Tel: 507-238-8702 Fax: 507-238-8271 e-mail:
For technical support contact us at 1-800- 458-7062 or fax us at 1-800-368-2042
Page 5 of 18
FUNCTION KEYS and DISPLAYED ANNUNCIATORS
Net
Gross
B/G
T
ZERO
TARE
0
GROSS/NET
I
ON/OFF
MODE
0
SET
5
CALL
1
2
3
6
8
7
4
9
Key
Function
ON/OFF:
Switch on / Switch off
MODE:
Toggle between weight units mode (lb, oz, kg) and activate the counting mode
(pcs). Key is also used to exit check weighing and return to normal weighing
mode.
ZERO:
Press this key to return to zero. Zero key will only operate if displayed
weight is less than 2 % of full scale capacity 2%
CALL:
In checking weight mode, used to activate a saved target settings. In
configuration mode, used to scroll between setting.
B/G (Gross/Net): Used to toggle between net and gross weight. A bullet on the display
will light to indicate what mode you are in
TARE:
Put a container on the scale, press this key to tare the weight. The
tare value is stored.
SET:
Used to enter into set-up for check point target settings. In counting
mode, used to select sampling quantity. In weighing mode, press and
hold the SET key for 3 seconds to enter into configuration mode.
Numerical keys
(0~9)
Used to call out saved target settings, and enter upper and lower limits.
Stable weight
enunciator
υ
O
τ
Zero
enunciator