Salter Brecknell C3255 - Manual (Page 2)

1000 Armstrong Drive. Fairmont, Minnesota 56031 Tel: 507-238-8702 Fax: 507-238-8271 e-mail: [email protected]
For technical support contact us at 1-800- 458-7062 or fax us at 1-800-368-2042
Page 2 of 18
INTRODUCTION
The 3255 Checkweigher series scales are versatile and easy to use. The large display is allows
you to easily view the weight.
The 3255 allows you to store 10 preset checkweighing target settings, provides a simple counting
feature and is battery operated using 6 “C” cell alkaline batteries (not included).
The 3255 Checkweigher series is NTEP approved at specific capacities and resolutions.
The stainless steel weighing platform and base allows you to wipe down the unit in moist
applications. Please note this unit is not intended to be used in wash down applications. Please
contact your local dealer to to see if your application meets the requirements of this scale.
The 3255 is equipped with a foldable display bracket, which allows you to lower to display
assembly when you are using the unit in portable applications.
GETTING STARTED
1. Remove the scale from it’s packaging. Included is the 120 Volt AC adapter, user manual, scale
base and display assembly.
2. To install the scale raise the display assembly up from the base, adjust the display locking
button into place and make sure the display head is locked into position.
3. To ensure proper weighing make sure the scale is level, using the level bubble on the rear of the
unit. Once level, tighten locking nuts using a 13 mm wrench.
4. Always fit the Adaptor to the scale BEFORE connecting to an electrical outlet. Disconnect from
the electrical outlet BEFORE disconnecting the adaptor from the scale.
5. If installing “C” batteries make sure you do not use the AC adapter.
AC adapter plug