AVer HVC130 user manual - Manual (Page 8)

4
Remote Control
The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries are installed
properly before using. Aim the remote control to the AVer HVC camera infrared sensor to operate the
unit.
* Available in AVer HVC330/310 model only.
Name Function
Zoom
Layout
Vol
Presentation
Record
Mute
Image Ctrl Preset Snapshot Dual
Far/ Near Input
16:9/ 4:6 Back
Call Hang up
Info Phonebook
Home
1 2 3
4 5 6
7 8
0
@ #
#
9
(4 )
(8 )
(3 )
(5 )
(23)
(22)
(12)
(10)
(17)
(16)
(2 )
(1 )
(18)
(19)
(20)
(14)
(6 )
(7 )
(9 ) (15)
(13)
(11)
(21)
(fig. 1.5)
(1) Info Display the call statistics information.
(2) Numeric Pad Use to enter numeric number.
(3) Call Start a call or add another party.
(4) 16:9/4:3
Toggle between 16:9 or 4:3 to match the monitor
aspect ratio.
(5) ▲,▼,◄, & ►

Use these buttons to navigate through the
selections in OSD menus or on-screen keyboard.

Pan the zoomed in camera image or the captured
image.

Move around within the zoomed in camera image
or the captured image.
(6) Far/Near
Select to control either near site or far site camera.
The Cam. Control icon will appear on the screen
to show which camera site you are going to control.
The Cam. Control icon will disappear in 5 sec.
The camera from the far site can only be
operated when the enable far site to control
the camera is permitted.
(7) Mute
Turn on/off the MIC. This mute icon will appear
when the mic is turned off. The mute icon will
become translucent in 5 sec.
(8) Zoom +/- Zoom in/out the camera image or the captured
image.
(9) Presentation Share either the video/image from the VGA IN port
or the captured image.
This present icon will appear on the screen to
indicate sharing the present image. The present
icon will disappear in 5 sec.