AVer HVC130 user manual - Manual (Page 32)

28
15B
LAN configuration
1. Select LAN Configuration and press .
2. In Obtain IP Address selection, select the type of IP
and press .

DHCP – configures the system to automatically
obtain IP address from the DHCP server.

Static IP – configures the system to use the
assigned IP Address. Select this when the public
IP address is available.

Your IP address is - shows the current IP
address; enter info when you need to configure
your IP address manually.

Subnet Mask - shows the designated IP address
routing prefix; enter info when the system does
not automatically obtain the subnet mask.

Default Gateway - allows traffic from one point
and exit point in network; enter info when the
system does not automatically obtain the
gateway.
3. Select Apply and press to save the setting.