AVer HVC130 user manual - Manual (Page 39)

35
ENGLISH
3. Select Auto Answer and press . In the Auto
Answer menu, select OFF to turn off Auto Answer,
ON to answer the call automatically, and Do Not
Disturb to automatically reject incoming calls.
If you are already in a meeting, even if the Auto
Answer is turned on, you need to manually accept
the next call.
23B
To Setup the Session Initiation Protocol (SIP)
1. Select Setting> System Settings> General Setting>
Call Settings > SIP and press .
2. Select Enable SIP check box and press to
activate/deactivate using SIP.
3. Select the SIP Transport Protocol and choose the
type of transport protocol.
To ensure connection, verify if both calling parties
are using the same transport protocol. The default
setting is UDP.