Press start/stop button, When recording has ended, press eject button, Turn camera off – Canon E 230 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

z
о

REC

7. Press start/stop button.

•

Recording starts.

•

Tally lamp flashes rapidly and “REC” appears in
viewfinder. EH

•

See Advanced Functions section for information on making
your recordings more effective (see pp. 33 - 61).

8. Press start/stop button again to temporarily

pause recording. ИДЯ

• Press start/stop button once again to resume recording.
• See “Record Review” (p. 34) to check your recording.

9. When recording has ended, press EJECT

button.

• Video cassette compartment opens.

10. Remove video cassette and close video

cassette compartment again.

11. Turn camera off.

• Mode indicator goes off.

Notes:

• The tape counter will be reset to 0:00:00 each time a video cassette is loaded.
• The camera automatically turns off if record pause mode lasts more than approximately 7 minutes. To

resume recording turn camera on and press start/stop button.

• For security, check the viewfinder display for correct mode during shooting.
• Avoid recording near sources of electric or magnetic fields, such as a TV tower, which can cause noise

in the picture or a camera malfunction.

• If tape speed is changed during recording, the tape will contain noise at that point.