Setting the safety shift function – Canon T 90 User Manual

Page 69

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

< Setting the Safety Shift Function >

1) Set the T90 to the shutter-priority AE (Tv) or

the aperture-priority AE (Av).

2) Press both the film speed button and the

exposure compensation button at the same
time for approx. 1 sec

3) The “ E ’’ mark indicating the safety shift

will then appear on the display panel and the
safety shift function will be activated.

4) To clear the safety shift function, press both

the film speed button and the exposure com

pensation button again until the “ E ”

disappears.

Note

Setting the safety shift function is possible in any

mode, but is effective oniy in the shutter-priority AE

and the aperture-priority AE modes.