Canon T 90 - Manual (Page 208)

switches to L mode when battery power
drops below prescribed voltage to make
shooting capacity longer
Film Rewind:
Automatic using the built-in core­
less motor exclusively used for film
rewind Automatically starts when the end
of the film is reached and then automati­
cally stops (approx. 8 secs with 24-exp.
film). Manual film rewind is also possible
by pressing the manual rewind button
Flash Contact:
Coupled directly to the camera
by means of the X-sync contact on the ac­
cessory shoe. When using the Speedlite
300TL, either the first shutter curtain syn­
chronization or the second shutter curtain
synchronization can be set.
Automatic Flash:
When the Speedlite 300TL is used and the
camera is set to a program AE mode:
1 A-TTL flash-auto: Using A-TTL program
of the camera and the near-infrared
preflash of the Speedlite, the correct
aperture value is automatically set ac­
cording to the shooting distance and
subject reflectivity. X-sync speed is
also automatically set between 1/60
— 1/250 sec upon flash charge-
completion. TTL control system which
meters the light reflected from the film
surface Automatic fill-in flash is possi­
ble.