Canon T 90 - Manual (Page 35)

1. Attaching the Lens
1) Turn the rear lens cap in the
direction of the arrow until it
stops, and pull it off the lens.
• To attach the rear lens
cap, align its arrow with
the red dot on the lens.
Then lightly push it in and
turn
it clockwise until it
stops.
2) Turn the body cap counter­
clockwise and pull it off.
• To attach the body cap,
first align its red position­
ing point with the red dot
above the camera mount,
then turn the cap clock­
wise.
3) To mount the lens, first align
the lens’ mount positioning
point with the camera’s red
dot.
Do not mount the lens if the red
dot inside the oamera mount is
showing; correct exposure is im­
possible if you do In this case,
push in the stop-down lever so
that it locks in the normal position
and this warning mark can no
longer be seen.
2 0