Automatic setting of the film speed, A -so 7, Automatic setting of the film speed > a -so – Canon T 90 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A -so
7
"
The T90 is designed to automati
cally set film speed by sensing
he DX code marked on the film
bassette.
1 When using a film with DX
code, you do not have to
set the film speed. (ISO
25-5000)
• The film speed automati
cally set according to the
DX code will appear on
the display panel while
the camera is advancing
the film toward the first
usable frame. (Refer to
the left page.)
When using a film without
DX code, set the film
speed manually.
1) While pressing the film
Film passing through X-ray examinations at airports,
even when loaded In a camera, may be exposed
and ruined. To avoid accidental exposure, tell the
inspector you want your camera and film hand
l^hecked
speed
button,
turn
the
electronic
input
dial
until
the
film
speed
(indicated
by ISO) of your film ap
pears
on
the
display
panel, (ISO 6-6400)
2) Remove your finger from
the film speed button.
•
The
preset
film
speed
will
appear
and
blink
on the display panel to
warn
you
if
the
film
speed
is
not
set.
Always be sure to set
the film speed correct
ly.
(Once
the
film
speed is set, the warn
ing stops.)
31