Clearing the preset exposures – Canon T 90 User Manual

Page 151

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

< Clearing the Preset Exposures >

1 Before shooting

1) Press both the shooting mode selector

and the metering mode selector at the

same time again

2) While pressing both selectors, turn the

electronic input dial to return the frame
counter to “I”,

3) Remove your fingers from both selectors

The“ eg "mark will disappear and multi

ple exposure mode is cleared

2 While shooting

The operating procedures are basically the
same as above, but turn the electronic input
dial until the frame counter is blank or there is

no frame counter display in step 2).