Shutter, Shutter speeds, Self-timer – Canon T 90 User Manual
Page 207: Film loading, Film wind, Film winding mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 H/S control — ±4 steps by 1/2 incre
ment (can only be used during the
spot area metering, and in the FE lock
mode with the Speedlite 300TL)
Shutter:
Vertical-travel metal type focal-plane
shutter. All speeds electronically con
trolled. Front and back curtains controlled
by separate quick-return permanent mag
nets.
Shutter Speeds:
1/4000—30 secs and bulb.
(X-sync = 1 /250 sec) Can also be set in
1
/2 step.
Self-Timer:
Electronically controlled, with a
delay of either approx. 10 secs or approx.
2 secs Indicated by blinking red LED of
the operation confirmation lamp.
Film Loading:
Automatic. After the film has
been positioned and the back cover
closed, the film is automatically advanced
to the 1
St
usable frame and then automati
cally stopped, (approx. 2 secs) The frame
counter display then reads "1 ”.
Film Wind:
Automatic using the built-in core
less motor exclusively used for film trans
port. Continuous shooting is possible.
Confirmation by the film transport bar
marks on the LCD display panel.
Film Winding Mode:
Three selectable modes;
S (single exposure), FI (max. 4.5 frames
per sec), and L (max. 2 frames per sec).
When operating in FI mode, automatically