Canon E 600 User Manual
Canon
This manual is related to the following products:
Table of contents
Document Outline
- 8mm VIDEO CAMCORDER
- Table of Contents
- WL-50 Wireless Controller
- Viewfinder Displays
- Power Sources
- Attaching Battery Pack IEQ
- 1. Slide battery pack into power source compartment.
- 2. Press battery pack until it clicks and locks in place.
- Removing Battery Pack
- 1. Slide and hoid ВАТТ EJECT switch up.
- 2. Puii battery pack out, as shown.
- Charging Battery Pack
- Using AC Power
- CA-100 Compact Power Adapter
- Using Car Battery
- CB-110 Car Battery Adapter (option)
- Attaching DC Coupler |Q3
- 1. Insert DC-100 DC Coupler into power source compartment.
- 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
- Setting Date and Time
- 1. Turn camera on by pressing OPERATE button.
- 2. Press and hold DATE button for more than 3 seconds. iEgl
- 3. Press + and - buttons to scan year display.
- 4. Press SHIFT button when correct year is shown.
- 5. Press + and - buttons to scan month display.
- 6. Press SHIFT button when correct month is shown.
- 7. Press + and - buttons to scan day display.
- 8. Press SHIFT button when correct day is shown.
- 9. Press + and - buttons to scan hour display.
- 10. Press SHIFT button when correct hour is shown.
- 11. Press + and - buttons to scan minute
- display.
- 12. Press DATE button when correct minute is shown.
- Camera Preparations
- Camera Recording
- 1. Attach power source.
- 2. Turn camera on.
- 3. Press A (EJECT) button.
- 4. Load video cassette and close video cassette compartment.
- 5. Press SP/LP button to select tape mode.
- 6. Turn grip to desired position.
- 7. Press start/stop button.
- 8. Press start/stop button again to temporarily pause recording. ^0
- 9. When recording has ended, press A (EJECT) button.
- 10. Remove video cassette and close video cassette compartment again.
- 11. Turn camera off.
- Video cassette erasure prevention switch
- Tape Counter
- Recording Reminder
- Battery Pack Warning зо-в
- Recording Using Tripod зо-с
- Record Search
- Record Review
- Edit-erase
- Recording Date and Time
- Age Insert
- Registering the Birthday
- 1. Turn camera on.
- 2. Press and hold AGE button for more than 3 seconds. E3il
- 3. Press + and - buttons to scan year display.
- 4. Press SHIFT button when correct year is shown.
- 5. Press -I- and - buttons to scan month display.
- 6. Press SHIFT button when correct month is shown.
- Autofocus 40-A
- 'N Subjects Not Suitable for Autofocus
- Manual Focus
- 1. Press FOCUS [^M button to select manual focus.
- 2. Rotate zooming lever to telephoto end.
- 3. Look through viewfinder and rotate focusing ring to focus on subject.
- 4. Use zooming iever to frame subject properly.
- Focus Lock
- 1. Press FOCUS [^/M button to select manual
- focus.
- 2. Rotate zooming lever to wide-angle end.
- 3. Press and hold macro button on zooming iever and move iever into macro range.
- 4. Approach subject to desired size in viewfinder.
- 5. Use zooming iever within macro range for fine focusing.
- 6. When macro recording is completed, reverse steps 2 and 3.
- Power Zoom 44-a
- Manual Zoom 44-b
- Wireless Zoom 44-c
- White Balance
- Shooting with Video Light
- Attaching Video Light 47-a
- 1. Insert video light plug into accessory shoe on the camera.
- 2. Slide video light into accessory shoe until it stops.
- Removing Video Light 47-e
- 1. Press and hold lock release button.
- 2. Slide video light out of accessory shoe.
- Replacing Bulb 49-a
- 1. Rotate the protector in the indicated direction.
- 2. Puil out the oid buib.
- 3. insert a new buib positioning the notch at the bottom.
- 4. Rotate the protector in the indicated direction.
- Gain-up/Backlight Compensation
- High-Speed Shutter
- Fade
- Adding Titles to Recordings
- o
- g
- Creating Character Titles
- 1. Place camera in record pause.
- 2. Press CHARACTER TITLE button for more than 3 seconds to display title lines in viewfinder.
- 3. Press SHIFT button to move the cursor to position where you want to start the title. Ban
- 4. Use + and - buttons to scan list of title characters.
- 5. When the character you want is displayed, press SHIFT button again to move to next cursor position. EiSI
- 6. Follow steps 4 and 5 until your title Is complete.
- 7. When the title Is finished, press CHARACTER TITLE button. Ii5gl
- Creating Digital Titles
- 1. Place camera in record pause mode.
- 2. Frame your image and press MEMO button.
- 3. Press COLOUR button to select desired colour.
- Recording Titles
- 1. While recording or in record pause mode, press CHARACTER TITLE or DISPLAY button. RKl
- 2. Press CHARACTER TITLE or DISPLAY button again to end title recording.
- Adjusting Image Density (Digital Title)
- Using External Microphone and
- Playback Connection
- Using TV with AudioA/ideo Input Terminals
- Connection Procedure
- Connection Procedure STil^i© (E600 only) ^
- Using TV with SCART Terminal
- Connection Procedure
- Connection Procedure STil^E©
- (E600 oniy) ^3
- Selecting Video Channel (European model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press ■ (STOP) button to select playback mode.
- 4. Press < (PLAY) button to start playback.
- 5. Set RF unit’s G/l selector using flat-edge screwdriver.
- 6. Set TV and video channel selector to video channel (video channel selector is factory-set to CH 32).
- Selecting Video Channel (Australian model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press ■ (STOP) button to select playback mode.
- 4. Press < (PLAY) button to start playback.
- 5. Set TV and video channel selector to video channel (video channel selector is factory-set to 1CH) using a flat-edge screwdriver.
- Playback Procedure
- Special Playback Methods
- Tape Return
- Editing to Another VTR
- Canon E400/E600 Video System Chart
- Carrying Cases
- Optional Accessories
- CB-110 Car Battery Adapter
- BP-E718 Battery Pack
- BP-E722 Battery Pack
- BP-E722D Battery Pack
- MC-100 Multi-battery Charger
- RS-300 Rain Shield
- VL-20 Battery Video Light
- TL-37 Teie-converter
- WD-37 Wide-converter
- FS-37 Fitter Set
- FS-37U Fiiter Set
- ZM-100 Stereo/Zoom Microphone (E600 oniy)
- MB-100 Microphone Boom (E600 oniy)
- SA-1 Adapter Bracket (E600 only)
- Problems and Troubleshooting
- Condensation (DEW)
- Cautions
- g
- F. Always Replace the Lens Cap.
- G. Do Not Expose the Camera to Shock or Vibrations.
- H. Avoid Sudden Changes in Temperature.
- I. Do Not Disassemble the Camera.
- J. Using the Battery Pack and Recommended Accessories.
- Using Your BaHery Packs Effectively
- Immediately After Purchase
- General Use
- storage
- Terminology
- Maintenance
- Keep the Heads Clean.
- Clean the Camera with a Soft, Dry Cloth.
- Store the Camera Properly.
- Store Cassette Tape Properly.
- Check the Operation of Each Component.
- g
- g
- Specifications
- Canon