Canon E 600 - Manual (Page 29)

0 : 35 : 40 ^
V__________
OSEC
1
10 SEC
_________________ >
Tape Counter
During recording, the tape counter in the
viewfinder indicates how long you have
recorded.
In the case shown in the diagram, you have
recorded for approximately 35 minutes and 40
seconds (in SP mode).
• The tape counter is reset to 0:00:00 when you
press the C. RESET button, or each time you
load a video cassette.
• The tape counter also appears during
playback and record search, so you can use it
to verify how long the tape has run.
• Tape counter time and actual recording length ^
may be slightly different. Use the tape counter 9
only as an approximate guide.
q
• When recording in LP mode, actual recording
length is approximately twice the tape counter
time.
JO
m
o
o
Recording Reminder
When you start to record, the camera counts off
the first 10 seconds of your recording and
displays “0 SEC” through “10 SEC” in the
viewfinder. This function is designed to help you
make sure your scenes aren’t too short, for easy
viewing and editing. Try to record for at least the
full 10 seconds. ES3
• Recording reminder time and actual recording
length may be slightly different. Use recording
reminder only as an approximate guide.
29