Canon E 600 - Manual (Page 10)

WL-50 Wireless Controller
TALLY/SENSOR
ON ««OFF
Using the wireless controller you can operate
the camera from a distance,
O Transmitter
0 F. (Fade) START/STOP Button
0 ON SCREEN Button
O FF ►► Button
0 PLAY ► Button
O STILL ►M Button
0 REC • Button
0 STOP ■ Button
0 REW ◄◄ Button
0 TAPE RETURN Button
0 COUNTER RESET Button
0 ZOOM Buttons
0 START/STOP Button
Operation Bin
Aim wireless controller at camera remote
sensor
0 and press control buttons to operate
camera. Use wireless controller within 4 metres
of the camera. The tally lamp
0 lights up when
remote sensor receives a signal.
N o te s:
•
When using wireless controller, check that it lights
up the tally lamp. If tally lamp lights, wireless
controller can be used from that position.
• If you are too close to camera when operating
wireless controller, camera may not respond to
wireless controller's signal.
TALLY/SENSOR ON/OFF Switch [OB
• When using the wireless controller, or when
confirming camera operations with the tally
lamp, make sure that the TALLY/SENSOR
ON/OFF switch is set to ON.
• Set the TALLY/SENSOR ON/OFF switch to
OFF when recording through glass windows
or during wide macro recording. When the
switch is set to OFF, the wireless control
sensor will not function.
10