Canon E 333 D - Manual (Page 39)

Using a TV without Audio/ Video
Input Terminals
The optional RU-100 RF Unit is required in order
to view cassettes on a TV which does not have
audio/video input terminals. There are two RU-
100 models, one for Europe and one for
Australia. The connection and setting procedures
for the two models differ.
European Model
RU-100 QQ
□ Connection Plug
13 G/l Selector
B Video Channel Selector
B FROM ANT. Terminal
B TO TV Terminal
Coaxial Cable with DIN-Connectors KBSl
B male
13 female
Connection Procedure IWSI
1. Connect the RF Unit to the camera.
2. Attach the aerial cable to the FROM
ANT. terminal, and connect the
female connector to the TO TV
terminal of the RF unit.
• Please note the difference between ‘male’ and
‘female’ type DIN-connectors on the coaxial
cable.
3. Connect the male connector to the
aerial input terminal of the TV.
To View a Regular TV Programme
The RU-100 RF Unit has an automatic signal
selector which selects the signal from the video
camera whenever the camera is connected to the
RF unit and the power is turned on. To view a
regular TV programme, turn the camera off or
disconnect it from the RF unit.
CD
>
CO
o
O
Tl
m
>
CO
41