Canon E 333 D User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Inserting a New Lithium Battery
The CR2025 lithium battery provides your
camera with enough power to store character
tities, date and time, and an age, even when the
camera is turned off.
One iithium battery wiii iast approximately one
year. (Life span varies slightiy according to
ambient conditions.) When the iithium battery is
not in piace or is neariy exhausted, “DATE”
fiashes in the viewfinder indicating that the iithium
battery needs to be replaced.
Be sure to connect a power source to the camera
before changing the iithium battery, otherwise the
tities, date and time, and age will be cleared from
the camera’s memory and will have to be reset.
Inserting Procedure
1. Press the GRIP UNLOCK button
and rotate the grip downward.
2. Hold the camera with the battery
pack facing down, then draw out
the lithium battery holder.
• If the camera is heid with the battery pack
facing up, the iithium battery wili drop out
when the lithium battery hoider is removed.
3. Insert a new lithium battery into the
lithium battery holder with the +
side facing up.
4. Snap the lithium battery holder
back into the compartment.
Warning
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C or incinerate.
Replace the battery with Sanyo CR2025, Panasonic
CR2025 or Duraceli DL2025B. Use of another battery
may present a risk of fire or explosion. The used
battery should be handed back to the supplier for safe
disposal.
Caution
-------------------------------------------------------------
• Make sure the plus (+) side is facing up in the
lithium battery compartment.
• Keep the battery out of children’s reach. If
swallowed, contact physician immediately.
• To ensure proper contact, wipe the battery with the
clean, dry cloth before use.
• Do not pick up the battery using tweezers or other
metal tools which may cause short circuiting.
• Do not disassemble, heat or immerse in water, to
avoid risk of explosion.