Bulb exposures i, Multiple exposures, Buib exposures – Canon 3000 V User Manual
Page 41: B multiple exposures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bulb Exposures I
1
When bulb is set, the shutter is open during the time you keep
pressing the shutter button fully. Bulb exposures are useful when
long exposures are required for night scenes, fireworks,
astronomical photography, etc._______________________________________
Turn the Mode Dial to
Set the shutter speed to “
buLb
' • Look at the LCD panel and turn the <£S> dial to select" buLb"
•" buLb "follows “ 30" ”.
Select the desired aperture value.
• Hold down the < Av0> button and turn the <£S> dial.
Start the bulb exposure.
■ ► During the bulb exposure, “ buLb " blinks on the LCD panel.
• The bulb exposure continues as long as you hold down the
shutter button.
' Remote Controller RC-5 (optional) can also be used for bulb
exposures (p.24). When you press the transmit button, the
exposure will start 2 sec. later. To stop the exposure, press the
button again. (DATE Model only)
’ With a new set of batteries, the maximum bulb exposure time (at
20'C) will be about 4 hours.
@]Multiple Exposures
Since the film is not advanced after each shot, you can expose
multiple shots on the same frame. You can expose up to nine shots
on a single frame.___________________________________________________
<1 Move the <►> arrow to the
* • Look at the LCD panel and press the
button.
(S6)
►" I " will be displayed.
% Set the desired number of multiple exposures.
»Turnthe<¿S>dial.
• Press the shutter button halfway to return to normal camera
operation.
41