Canon 3000 V - Manual (Page 19)

i
Take the picture.
• Compose the shot and press the
shutter button fully.
(I
If you want to zoom, do it before focusing, Turning the zooming
ring after achieving focus may throw off the focus,
• If the built-in flash’s pop-up operation is obstructed, the <«CD>
icon will blink on the LCD panel. Press the shutter button halfway
to resolve the problem.
• When focus is achieved, the autofocus and auto exposure setting
will also be locked,
• If the focus confirmation light < • > blinks, the picture cannot be
taken. (p.30)
• Out of the seven AF points, the one covering the closest subject is
selected automatically to achieve focus.
• If multiple AF point marks will light, it means that all of them have
achieved focus at the respective points.
• In the Basic Zone modes (except <^> <^> ), the built-in
flash will pop up and fire automatically in low-light or backlit
conditions. To retract the flash, push it back down.
AF-Assist beam with the Built-in Flash
Under low-light conditions, the buiit-in hash fires a brief burst of
fiashes when you press the shutter button haifway. This is to
iiluminate the subject to enabie easier autofocusing.
Q • The AF-assist beam does not function in the < Sk > < ^ > < S >
modes.
• The buiit-in hash's AF-assist beam is effective up to about 4
meters/13.1 feet.
• In the Creative Zone modes when the buiit-in fiash is popped up
with the button, the AF-assist beam may be emitted.
19